X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
14cnx76rear%20b14cnx76front14cnx76rear_b
Diaphragm Material
Magnet Material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Continuous Power Handling
 
 
 
 
 
 
 

Key Features

  • 800 W continuous program power capacity
  • 80° nominal coverage
  • 45 - 18000 Hz response
  • 100 dB sensitivity
  • 50.5 mm (2”) HF unit exit diameter
  • Single Neodymium magnet assembly

Specifications

  • Nominal Diameter355 mm (14.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.5 Ω
  • Minimum Impedance HF8.2 Ω
  • Frequency Range45 - 18000 Hz
  • Dispersion Angle180 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Ring

Specifications LF Unit

  • LF Sensitivity2100.0 dB
  • LF Nominal Power Handling3400 W
  • LF Continuous Power Handling4800 W
  • LF Voice Coil Diameter76 mm (3.0 in)
  • LF Winding MaterialCopper
  • LF Flux Density1.05 T
  • Former MaterialGlass Fibre
  • Winding Depth16.5 mm (0.65 in)
  • Magnetic Gap Depth9.0 mm (0.35 in)

Specifications HF Unit

  • HF Sensitivity5105.0 dB
  • HF Nominal Power Handling680 W
  • HF Continuous Power Handling7160 W
  • HF Voice Coil Diameter75 mm (3.0 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.8 T
  • Diaphragm MaterialPolyester/Titanium
  • Recommended Crossover81.2 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency45 Hz
  • Re5.2 Ω
  • Qes0.29
  • Qms8.5
  • Qts0.28
  • Vas131.0 dm3 (4.63 ft3)
  • Sd707.0 cm2 (109.59 in2)
  • η₀4.0 %
  • Xmax6.0 mm
  • Xvar8.0 mm
  • Mms67.0 g
  • Bl18.4 Txm
  • Le1.0 mH
  • EBP155 Hz

Mounting And Shipping Info

  • Overall Diameter359 mm (14.13 in)
  • Bolt Circle Diameter343 mm (13.5 in)
  • Baffle Cutout Diameter323 mm (12.72 in)
  • Depth188 mm (7.4 in)
  • Flange and Gasket Thickness12 mm (0.47 in)
  • Net Weight5.6 kg (12.35 lb)
  • Shipping Units1
  • Shipping Weight6.9 kg (15.21 lb)
  • Shipping Box425x425x224 mm (16.73x16.73x8.82 in)

Service Kit

  • Service Kit LFRCK14CXN768
  • Replacement diaphragmMMD9028M
  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated nominal impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated nominal impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.
  • Investor center
  • Credits
  • Privacy Policy
  • P.IVA/VAT 01398890481