Features
- 700 W continuous program power capacity
- 64 mm (2.5 in) copper voice coil
- 80 - 4000 Hz response
- 97 dB sensitivity
- Neodymium inside slug magnet assembly
- Shorting copper cap for extended HF response
- Ventilated voice coil gap for reduced power compression
Specifications
- Nominal Diameter200 mm (8.0 in)
- Nominal Impedance16 Ω
- Minimum Impedance14.4 Ω
- Nominal Power Handling1350 W
- Continuous power handling2700 W
- Sensitivity (1W/1m)397.0 dB
- Frequency Range80 - 4000 Hz
- Voice Coil Diameter64 mm (2.5 in)
- Winding MaterialCopper
- Former MaterialGlass Fibre
- Winding Depth14.0 mm (0.55 in)
- Magnetic Gap Depth8.0 mm (0.31 in)
- Flux Density1.25 T
Design
- Surround ShapeDouble Roll
- Cone ShapeExponential
- Magnet MaterialNeodymium Inside Slug
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentWP Waterproof Front Side
- Recommended Enclosure10.0 dm3 (0.35 ft3)
- Recommended Tuning85 Hz
Parameters4
- Resonance Frequency73 Hz
- Re11.2 Ω
- Qes0.25
- Qms6.8
- Qts0.24
- Vas11.8 dm3 (0.42 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.8 %
- Xmax± 4.5 mm
- Xvar± 5.5 mm
- Mms27.0 g
- Bl24.0 Txm
- Le1.03 mH
- EBP292 Hz
Mounting and Shipping Info
- Overall Diameter225 mm (8.8 in)
- Bolt Circle Diameter210 mm (8.3 in)
- Baffle Cutout Diameter187.0 mm (7.4 in)
- Depth95 mm (3.74 in)
- Flange and Gasket Thickness10 mm (0.39 in)
- Air Volume Occupied by Driver1.5 dm3 (0.05 ft3)
- Net Weight2.6 kg (5.73 lb)
- Shipping Units1
- Shipping Weight3.05 kg (6.72 lb)
- Shipping Box255x255x150 mm (10.04x10.04x5.91 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 4V for 16 ohm Nominal Impedance
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.