X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
13_45_03_680_8ndl64_0018_24_02_324_8ndl64_c18_24_02_199_8ndl64_a
Continuous power handling
Voice coil diameter
Magnet material
 
 
 
 

Features

  • 700 W continuous program power capacity
  • 64 mm (2.5 in) copper voice coil
  • 80 - 4000 Hz response
  • 97 dB sensitivity
  • Neodymium inside slug magnet assembly
  • Shorting copper cap for extended HF response
  • Ventilated voice coil gap for reduced power compression

Specifications

  • Nominal Diameter200 mm (8.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance7.2 Ω
  • Nominal Power Handling1350 W
  • Continuous power handling2700 W
  • Sensitivity (1W/1m)397.0 dB
  • Frequency Range80 - 4000 Hz
  • Voice Coil Diameter64 mm (2.5 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth14.0 mm (0.55 in)
  • Magnetic Gap Depth8.0 mm (0.31 in)
  • Flux Density1.25 T

Design

  • Surround ShapeDouble Roll
  • Cone ShapeExponential
  • Magnet MaterialNeodymium Inside Slug
  • SpiderSingle
  • Pole DesignT-Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure10.0 dm3 (0.35 ft3)
  • Recommended Tuning85 Hz

Parameters4

  • Resonance Frequency80 Hz
  • Re5.4 Ω
  • Qes0.25
  • Qms10.91
  • Qts0.25
  • Vas9.6 dm3 (0.34 ft3)
  • Sd220.0 cm2 (34.1 in2)
  • η₀1.88 %
  • Xmax± 4.5 mm
  • Xvar± 5.0 mm
  • Mms28.0 g
  • Bl17.5 Txm
  • Le0.62 mH
  • EBP320 Hz

Mounting and Shipping Info

  • Overall Diameter225 mm (8.8 in)
  • Bolt Circle Diameter210 mm (8.3 in)
  • Baffle Cutout Diameter187.0 mm (7.4 in)
  • Depth95 mm (3.74 in)
  • Flange and Gasket Thickness10 mm (0.39 in)
  • Air Volume Occupied by Driver1.5 dm3 (0.05 ft3)
  • Net Weight2.6 kg (5.73 lb)
  • Shipping Units1
  • Shipping Weight3.05 kg (6.72 lb)
  • Shipping Box255x255x150 mm (10.04x10.04x5.91 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.