Features
- 600 W continuous program power capacity
- 64 mm (2.5 in) copper voice coil
- 50 - 3000 Hz response
- 92 dB sensitivity
- Aluminium demodulating ring allows a very low distortion figure
Specifications
- Nominal Diameter200 mm (8.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance6.7 Ω
- Nominal Power Handling1300 W
- Continuous power handling2600 W
- Sensitivity (1W/1m)392.0 dB
- Frequency Range50 - 3000 Hz
- Voice Coil Diameter64 mm (2.5 in)
- Winding MaterialCopper
- Former MaterialGlass Fibre
- Winding Depth19.0 mm (0.75 in)
- Magnetic Gap Depth10.0 mm (0.39 in)
- Flux Density0.9 T
Design
- Surround ShapeRoll
- Cone ShapeRadial
- Magnet MaterialFerrite
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentWP Waterproof Front Side
- Recommended Enclosure16.0 dm3 (0.57 ft3)
- Recommended Tuning50 Hz
Parameters4
- Resonance Frequency51 Hz
- Re5.8 Ω
- Qes0.32
- Qms10.1
- Qts0.31
- Vas15.0 dm3 (0.53 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀0.7 %
- Xmax± 7.0 mm
- Xvar± 8.0 mm
- Mms41.0 g
- Bl15.8 Txm
- Le1.7 mH
- EBP159 Hz
Mounting and Shipping Info
- Overall Diameter225 mm (8.86 in)
- Bolt Circle Diameter210 mm (8.3 in)
- Baffle Cutout Diameter187.0 mm (7.4 in)
- Depth100 mm (3.94 in)
- Flange and Gasket Thickness9 mm (0.37 in)
- Air Volume Occupied by Driver1.5 dm3 (0.05 ft3)
- Net Weight4.0 kg (8.82 lb)
- Shipping Units1
- Shipping Weight4.45 kg (9.81 lb)
- Shipping Box255x255x150 mm (10.04x10.04x5.91 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.