Features
- 200 W continuous program power capacity
- 70° nominal coverage
- 60 - 18000 Hz response
- 91 dB sensitivity
- 19 mm (3/4”) HF unit exit diameter
Specifications
- Nominal Diameter127 mm (5.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance LF6.5 Ω
- Minimum Impedance HF6.5 Ω
- Frequency Range60 - 18000 Hz
- Dispersion Angle170 °
- Woofer Cone TreatmentWP Waterproof Front Side
- Magnet MaterialFerrite (LF) - Neodym. Ring (HF)
Specifications LF unit
- LF Sensitivity291.0 dB
- LF Nominal Power Handling3100 W
- LF Continuous Power Handling4200 W
- LF Voice Coil Diameter44 mm (1.7 in)
- LF Winding MaterialCopper
- LF Flux Density1.07 T
- Former MaterialKapton
- Winding Depth9.0 mm (0.35 in)
- Magnetic Gap Depth6.0 mm (0.24 in)
Specifications HF unit
- HF Sensitivity5107.5 dB
- HF Nominal Power Handling610 W
- HF Continuous Power Handling720 W
- HF Voice Coil Diameter25 mm (1.0 in)
- HF Winding MaterialAluminium
- HF Flux Density1.65 T
- Diaphragm MaterialPolyester
- Recommended Crossover82.5 kHz
- Inductance0.1 mH
Parameters
- Resonance Frequency61 Hz
- Re5.6 Ω
- Qes0.25
- Qms7.8
- Qts0.25
- Vas7.0 dm3 (0.25 ft3)
- Sd95.0 cm2 (14.7 in2)
- η₀0.6 %
- Xmax± 3.0 mm
- Xvar± 5.0 mm
- Mms12.0 g
- Bl10.5 Txm
- Le0.8 mH
- EBP244 Hz
Mounting and Shipping Info
- Overall Diameter136 mm (5.35 in)
- Bolt Circle Diameter142 mm (5.6 in)
- Baffle Cutout Diameter122 mm (4.8 in)
- Depth110 mm (4.33 in)
- Flange and Gasket Thickness8 mm (0.31 in)
- Net Weight1.85 kg (4.1 lb)
- Shipping Units1
- Shipping Weight2.3 kg (5.07 lb)
- Shipping Box255x255x150 mm (10.04x10.04x5.91 in)
- Included by –6 dB down points.
- Applied RMS Voltage is set to 2.83V.
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83V.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- 12 dB/oct. or higher slope high-pass filter.
