Features
- 200 W continuous program power capacity
- 1.4" horn throat diameter
- 86 mm (3.4 in) aluminium voice coil
- Titanium diaphragm
- 500 - 18000 Hz response
- 108.5 dB sensitivity
- Neodymium magnet assembly with shorting copper cap
Specifications1
- Throat Diameter36 mm (1.4 in)
- Nominal Impedance16 Ω
- Minimum Impedance11.5 Ω
- Nominal Power Handling2100 W
- Continuous power handling3200 W
- Sensitivity (1W/1m)4108.5 dB
- Frequency Range0.5 - 18.0 kHz
- Recommended Crossover51.0 kHz
- Voice Coil Diameter86 mm (3.4 in)
- Winding MaterialAluminium
- Inductance0.1 mH
- Diaphragm MaterialTitanium
- Flux Density1.9 T
- Magnet MaterialNeo Inside Ring
Mounting and Shipping Info
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter118 mm (4.65 in)
- Depth63 mm (2.48 in)
- Net Weight2.0 kg (4.41 lb)
- Shipping Units1
- Shipping Weight2.04 kg (4.5 lb)
- Shipping Box120x120x65 mm (4.72x4.72x2.56 in)
- Other Details4x M6 Mounting Studs with bolts and washers included
- Driver mounted on B&C ME90 horn.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 4 V for 16 ohms Nominal Impedance.
- 12 dB/oct. or higher slope high-pass filter.