Features
- 200 W continuous program power capacity
- 44 mm (1.7 in) copper voice coil
- 63 - 6000 Hz response
- 92 dB sensitivity
Specifications
- Nominal Diameter127 mm (5.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance6.5 Ω
- Nominal Power Handling1100 W
- Continuous power handling2200 W
- Sensitivity (1W/1m)392.0 dB
- Frequency Range63 - 6000 Hz
- Voice Coil Diameter44 mm (1.7 in)
- Winding MaterialCopper
- Former MaterialKapton
- Winding Depth9.0 mm (0.35 in)
- Magnetic Gap Depth6.0 mm (0.25 in)
- Flux Density1.1 T
Design
- Surround ShapeRoll
- Cone ShapeExponential
- Magnet MaterialFerrite
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentWP Waterproof Front Side
- Recommended Enclosure5.0 dm3 (0.17 ft3)
- Recommended Tuning70 Hz
Parameters4
- Resonance Frequency63 Hz
- Re5.8 Ω
- Qes0.3
- Qms10.0
- Qts0.27
- Vas6.3 dm3 (0.22 ft3)
- Sd95.0 cm2 (14.7 in2)
- η₀0.55 %
- Xmax± 3.0 mm
- Xvar± 5.0 mm
- Mms12.0 g
- Bl10.0 Txm
- Le0.8 mH
- EBP210 Hz
Mounting and Shipping Info
- Overall Diameter155 mm (6.1 in)
- Bolt Circle Diameter142 mm (5.6 in)
- Baffle Cutout Diameter122.0 mm (4.8 in)
- Depth77 mm (3.03 in)
- Flange and Gasket Thickness9 mm (0.35 in)
- Air Volume Occupied by Driver0.5 dm3 (0.02 ft3)
- Net Weight1.6 kg (3.53 lb)
- Shipping Units1
- Shipping Weight1.8 kg (3.97 lb)
- Shipping Box210x210x125 mm (8.27x8.27x4.92 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.