X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
13_35_39_152_14cxn88_0013_35_28_496_14cxn88_0214_55_58_621_14cxn88_01
Diaphragm material
Magnet material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Continuous Power Handling
HF Continuous Power Handling
New to the large format coaxial family is the 14CXN88. Like the 12CXN88 and 15CXN88, that were introduced in the spring of 2017, this new 14” addition features an 88mm voice coil woofer and 75mm diaphragm high frequency driver. This motor combination offers an excellent balance between HF and LF output. As a practical compromise between our 12-inch and 15-inch alternatives, the 14CXN88 coaxial (which is actually 13.5-inches in diameter) offers better low frequency output than a 12-inch coaxial, but more balanced midrange performance than a 15-inch coaxial. 
 
 
 
 
 
 

Features

  • 1000 W continuous program power capacity
  • 80° nominal coverage
  • 45 - 18000 Hz response
  • 99 dB sensitivity
  • Single Neodymium magnet assembly
  • Aluminium demodulating ring allows a very low distortion figure
  • Double silicone spider with optimized compliance

Specifications

  • Nominal Diameter343 mm (13.5 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.8 Ω
  • Minimum Impedance HF8.8 Ω
  • Frequency Range45 - 18000 Hz
  • Dispersion Angle180 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Ring

Specifications LF unit

  • LF Sensitivity299.0 dB
  • LF Nominal Power Handling3500 W
  • LF Continuous Power Handling41000 W
  • LF Voice Coil Diameter88 mm (3.5 in)
  • LF Winding MaterialAluminium
  • LF Flux Density1.05 T
  • Former MaterialGlass Fibre
  • Winding Depth22.0 mm (0.87 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)

Specifications HF unit

  • HF Sensitivity5106.0 dB
  • HF Nominal Power Handling680 W
  • HF Continuous Power Handling7160 W
  • HF Voice Coil Diameter75 mm (3.0 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.75 T
  • Diaphragm MaterialTitanium
  • Recommended Crossover81.2 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency46 Hz
  • Re4.7 Ω
  • Qes0.27
  • Qms13.0
  • Qts0.26
  • Vas100.0 dm3 (3.53 ft3)
  • Sd707.0 cm2 (109.59 in2)
  • η₀3.6 %
  • Xmax± 8.5 mm
  • Xvar± 9.0 mm
  • Mms83.0 g
  • Bl20.7 Txm
  • Le0.95 mH
  • EBP170 Hz

Mounting and Shipping Info

  • Overall Diameter359 mm (14.13 in)
  • Bolt Circle Diameter343 mm (323.0 in)
  • Baffle Cutout Diameter326 mm (12.83 in)
  • Depth200 mm (7.87 in)
  • Flange and Gasket Thickness15 mm (0.59 in)
  • Net Weight7.4 kg (16.31 lb)
  • Shipping Units1
  • Shipping Weight9.0 kg (19.84 lb)
  • Shipping Box500x495x275 mm (19.69x19.49x10.83 in)

Crossover

Service Kit

  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.