X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
14_38_06_338_4mcx36rear_b14_38_06_490_4mcx36front14_38_06_487_4mcx36rear
Diaphragm material
Magnet material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Continuous Power Handling
HF Continuous Power Handling
Unique to B&C, a complete lineup of high sensitivity and power handling 4”, 5" and 6.5"  frame transducers. These high technology products are made with our famously critical quality control, allowing new compact loudspeaker designs with appropriately scaled performance.

Combined with a 1.4” dome compression driver, the unique 4MCX36 uses a higher Fs woofer than the standard 4CXN36, for applications where more mid bass and less low frequency is required. The 4MCX36 offers 150 - 18000Hz frequency response and a 70° conical coverage pattern. 
 
 
 
 
 
 

Features

  • 8 ohm LF unit, 16 ohm HF unit
  • 200 W continuous program power capacity
  • 70° nominal coverage
  • 150 - 18000 Hz response
  • 87 dB sensitivity
  • Neodymium magnet allows a very light yet powerful motor assembly
  • Aluminium demodulating ring allows a very low distortion figure

Specifications

  • Nominal Diameter100 mm (4.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.8 Ω
  • Minimum Impedance HF10.2 Ω
  • Frequency Range150 - 18000 Hz
  • Dispersion Angle170 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Ring

Specifications LF unit

  • Sensitivity287.0 dB
  • Nominal Power Handling3100 W
  • Continuous Power Handling4200 W
  • Voice Coil Diameter34 mm (1.34 in)
  • Winding MaterialCopper
  • Flux Density0.74 T
  • Former MaterialGlass Fibre
  • Winding Depth11.0 mm (0.43 in)
  • Magnetic Gap Depth6.0 mm (0.24 in)

Specifications HF unit

  • Sensitivity5102.0 dB
  • Nominal Power Handling625 W
  • Continuous Power Handling750 W
  • Voice Coil Diameter36 mm (1.42 in)
  • Winding MaterialAluminium
  • Flux Density1.65 T
  • Diaphragm MaterialHT Polymer
  • Recommended Crossover82.0 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency150 Hz
  • Re5.6 Ω
  • Qes1.2
  • Qms3.9
  • Qts0.91
  • Vas0.8 dm3 (0.03 ft3)
  • Sd56.0 cm2 (8.68 in2)
  • η₀0.22 %
  • Xmax± 4.0 mm
  • Xvar± 3.0 mm
  • Mms6.2 g
  • Bl5.27 Txm
  • Le0.87 mH
  • EBP125 Hz

Mounting and Shipping Info

  • Overall Diameter127 mm (5.0 in)
  • Bolt Circle Diameter114 mm (4.51 in)
  • Baffle Cutout Diameter103 mm (4.06 in)
  • Depth83 mm (3.27 in)
  • Flange and Gasket Thickness2 mm (0.08 in)
  • Net Weight0.57 kg (1.26 lb)
  • Shipping Units1
  • Shipping Weight0.79 kg (1.74 lb)
  • Shipping Box210x210x125 mm (8.27x8.27x4.92 in)

Service Kit

  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 4V.
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.