X
MENU
ENES

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6CXN36

6CXN36

Coaxials 6.5 inches

compare
Drawing
Datasheet
back
12_54_49_448_6cxn36rear12_54_49_525_6cxn36front12_54_49_192_6cxn36rear_b
Diaphragm material
Magnet material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Continuous Power Handling
HF Continuous Power Handling

Unique to B&C, a complete lineup of high sensitivity and power handling 4”, 5" and 6.5" frame transducers. These high technology products are made with our famously critical quality control, allowing new compact loudspeaker designs with appropriately scaled performance. Combined with a 1.4” dome compression driver, our 6CXN36 coaxial is one of the most compact and cost effective full range transducers that we have ever built, offering 90 - 18000Hz frequency response and a 90° conical coverage pattern. 

 
 
 
 
 
 

Features

  • 8 ohm LF unit, 16 ohm HF unit
  • 200 W continuous program power capacity
  • 90° nominal coverage
  • 90 - 18000 Hz response
  • 90 dB sensitivity
  • Aluminium demodulating ring for very low distortion

Specifications

  • Nominal Diameter165 mm (6.5 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.8 Ω
  • Minimum Impedance HF10.2 Ω
  • Frequency Range90 - 18000 Hz
  • Dispersion Angle190 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Ring

Specifications LF unit

  • LF Sensitivity290.0 dB
  • LF Nominal Power Handling3100 W
  • LF Continuous Power Handling4200 W
  • LF Voice Coil Diameter34 mm (1.3 in)
  • LF Winding MaterialCopper
  • LF Flux Density0.74 T
  • Former MaterialGlass Fibre
  • Winding Depth11.0 mm (0.43 in)
  • Magnetic Gap Depth6.0 mm (0.24 in)

Specifications HF unit

  • HF Sensitivity5100.0 dB
  • HF Nominal Power Handling625 W
  • HF Continuous Power Handling750 W
  • HF Voice Coil Diameter36 mm (1.4 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.65 T
  • Diaphragm MaterialHT Polymer
  • Recommended Crossover82.0 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency90 Hz
  • Re5.8 Ω
  • Qes1.17
  • Qms5.0
  • Qts0.95
  • Vas7.5 dm3 (0.26 ft3)
  • Sd132.0 cm2 (20.46 in2)
  • η₀0.45 %
  • Xmax± 4.1 mm
  • Xvar± 5.0 mm
  • Mms10.2 g
  • Bl5.34 Txm
  • Le0.94 mH
  • EBP76 Hz

Mounting and Shipping Info

  • Overall Diameter180 mm (7.09 in)
  • Bolt Circle Diameter165 mm (6.5 in)
  • Baffle Cutout Diameter146 mm (5.75 in)
  • Depth91 mm (3.58 in)
  • Flange and Gasket Thickness6 mm (0.25 in)
  • Net Weight0.7 kg (1.54 lb)
  • Shipping Units1
  • Shipping Weight1.15 kg (2.54 lb)
  • Shipping Box255x255x150 mm (10.04x10.04x5.91 in)

Crossover

Service Kit

  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 4V
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.