X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
12_48_29_197_de785tn_etc
Continuous power handling
Voice coil diameter
Diaphragm material
Throat diameter

While shrink-ray technology may not have escaped the 1990s, we have succeeded in creating two more highly compact drivers, not only permitting close spacing but also reducing weight and cost at the same time. In a larger, 3” coil we now offer the DE785: Designed with a sonic character like our famous DE950TN, but in a 112mm diameter package weighing only 4 lb (1.8kg). Continuous power handling of 220W combined with 107.5dB sensitivity primes this driver for consideration in a new generation of lighter, more compact line array loudspeakers.

 
 
 

Features

  • 220 W continuous program power capacity
  • 2" horn throat diameter
  • 75 mm (3 in) aluminum voice coil
  • Titanium diaphragm
  • 500 - 18000 Hz response
  • 107.5 dB sensitivity
  • Neodymium magnet assembly with shorting copper cap

Specifications1

  • Throat Diameter50 mm (2.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance8.3 Ω
  • Nominal Power Handling2110 W
  • Continuous power handling3220 W
  • Sensitivity (1W/1m)4107.5 dB
  • Frequency Range0.5 - 18.0 kHz
  • Recommended Crossover51.0 kHz
  • Voice Coil Diameter75 mm (3.0 in)
  • Winding MaterialAluminium
  • Inductance0.17 mH
  • Diaphragm MaterialTitanium
  • Flux Density1.95 T
  • Magnet MaterialNeodymium Ring

Mounting and Shipping Info

  • Four M5 holes 90° on 102 mm (4 in) diameter
  • Overall Diameter112 mm (4.41 in)
  • Depth77 mm (3.03 in)
  • Net Weight1.75 kg (3.86 lb)
  • Shipping Units1
  • Shipping Weight1.82 kg (4.01 lb)
  • Shipping Box135x135x93 mm (5.31x5.31x3.66 in)
  • Other Details4x M5 Mounting Studs with bolts and washers included

Service Kit

  • Driver mounted on B&C ME 60 horn.
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • 12 dB/oct. or higher slope high-pass filter.