Features
- 500 W continuous program power capacity
- 64 mm (2.5 in) copper voice coil
- 65 - 4000 Hz response
- 96.1 dB sensitivity
Specifications
- Nominal Diameter250 mm (10.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance6.3 Ω
- Nominal Power Handling1250 W
- Continuous power handling2500 W
- Sensitivity (1W/1m)396.1 dB
- Frequency Range65 - 4000 Hz
- Voice Coil Diameter64 mm (2.5 in)
- Winding MaterialCopper
- Former MaterialGlass Fibre
- Winding Depth14.3 mm (0.56 in)
- Magnetic Gap Depth8.0 mm (0.31 in)
- Flux Density1.16 T
Design
- Surround ShapeDouble Roll
- Cone ShapeExponential
- Magnet MaterialNeodymium Inside Slug
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentWP Waterproof Front Side
- Recommended Enclosure29.0 dm3 (1.02 ft3)
- Recommended Tuning65 Hz
Parameters4
- Resonance Frequency63 Hz
- Re5.3 Ω
- Qes0.33
- Qms5.1
- Qts0.31
- Vas22.2 dm3 (0.78 ft3)
- Sd320.0 cm2 (49.6 in2)
- η₀1.69 %
- Xmax± 5.2 mm
- Xvar± 6.0 mm
- Mms41.6 g
- Bl16.3 Txm
- Le1.17 mH
- EBP190 Hz
Mounting and Shipping Info
- Overall Diameter258 mm (10.16 in)
- Bolt Circle Diameter245 mm (9.65 in)
- Baffle Cutout Diameter232.0 mm (9.13 in)
- Depth112 mm (4.41 in)
- Flange and Gasket Thickness10 mm (0.39 in)
- Air Volume Occupied by Driver1.0 dm3 (0.04 ft3)
- Net Weight2.0 kg (4.41 lb)
- Shipping Units1
- Shipping Weight2.6 kg (5.73 lb)
- Shipping Box295x314x175 mm (11.61x12.36x6.89 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.