back
next
Continuous power handling
Voice coil diameter
Magnet material
The FW88 series is perfectly balanced for the loudspeaker systems of today. A performance-oriented range of ferrite woofers with 3.5" (88mm) voice coil and high flux ferrite magnet, incorporated into a compact but powerful motor package. The results are unexpected low frequency output and midrange extension to meet with almost any driver for two way applications. Do more, with less, with the FW88 series.
Features
- 1400 W continuous program power capacity
- 88 mm (3.5 in) aluminium voice coil
- 50 - 3000 Hz response
- 97 dB sensitivity
- Aluminium demodulating ring allows a very low distortion figure
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
Specifications
- Nominal Diameter320 mm (12.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance6.3 Ω
- Nominal Power Handling1700 W
- Continuous power handling21400 W
- Sensitivity (1W/1m)397.0 dB
- Frequency Range50 - 3000 Hz
- Voice Coil Diameter88 mm (3.5 in)
- Winding MaterialAluminium
- Former MaterialGlass Fibre
- Winding Depth21.5 mm (0.85 in)
- Magnetic Gap Depth11.0 mm (0.43 in)
- Flux Density1.04 T
Design
- Surround ShapeTriple Roll
- Cone ShapeExponential
- Magnet MaterialFerrite Ring
- SpiderDouble Silicone
- Pole DesignT-Pole
- Woofer Cone TreatmentWP Waterproof Front Side
- Recommended Enclosure40.0 dm3 (1.41 ft3)
- Recommended Tuning65 Hz
Parameters4
- Resonance Frequency53 Hz
- Re5.1 Ω
- Qes0.35
- Qms7.7
- Qts0.33
- Vas45.7 dm3 (1.61 ft3)
- Sd531.0 cm2 (82.31 in2)
- η₀2.05 %
- Xmax± 8.0 mm
- Xvar± 8.6 mm
- Mms76.4 g
- Bl19.5 Txm
- Le0.9 mH
- EBP151 Hz
Mounting and Shipping Info
- Overall Diameter315 mm (12.4 in)
- Bolt Circle Diameter298 mm (11.73 in)
- Baffle Cutout Diameter285.0 mm (11.22 in)
- Depth145 mm (5.71 in)
- Flange and Gasket Thickness12 mm (0.49 in)
- Air Volume Occupied by Driver2.5 dm3 (0.09 ft3)
- Net Weight8.25 kg (18.19 lb)
- Shipping Units1
- Shipping Weight9.15 kg (20.17 lb)
- Shipping Box360x360x200 mm (14.17x14.17x7.87 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.