Features
- 200 W continuous program power capacity
- 34 mm (1.34 in) copper voice coil
- 80 - 2000 Hz response
- 89 dB sensitivity
- Neodymium magnet allows a very light yet powerful motor assembly
Specifications
- Nominal Diameter100 mm (3.94 in)
- Nominal Impedance8 Ω
- Minimum Impedance6.2 Ω
- Nominal Power Handling1100 W
- Continuous power handling2200 W
- Sensitivity (1W/1m)389.0 dB
- Frequency Range80 - 2000 Hz
- Voice Coil Diameter34 mm (1.34 in)
- Winding MaterialCopper
- Former MaterialGlass Fibre
- Winding Depth11.0 mm (0.43 in)
- Magnetic Gap Depth7.0 mm (0.28 in)
- Flux Density1.25 T
Design
- Surround ShapeRoll
- Cone ShapeExponential
- Magnet MaterialNeodymium Inside Slug
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentTWP Waterproof Both Sides
- Recommended Enclosure3.0 dm3 (0.11 ft3)
- Recommended Tuning90 Hz
Parameters4
- Resonance Frequency79 Hz
- Re5.5 Ω
- Qes0.25
- Qms8.5
- Qts0.24
- Vas2.6 dm3 (0.09 ft3)
- Sd57.0 cm2 (8.84 in2)
- η₀0.5 %
- Xmax± 3.8 mm
- Xvar± 5.0 mm
- Mms7.2 g
- Bl8.8 Txm
- Le0.21 mH
- EBP316 Hz
Mounting and Shipping Info
- Overall Diameter127 mm (5.0 in)
- Bolt Circle Diameter114 mm (4.51 in)
- Baffle Cutout Diameter103.0 mm (4.06 in)
- Depth67 mm (2.64 in)
- Flange and Gasket Thickness3 mm (0.12 in)
- Air Volume Occupied by Driver0.25 dm3 (0.01 ft3)
- Net Weight0.57 kg (1.26 lb)
- Shipping Units1
- Shipping Weight0.69 kg (1.51 lb)
- Shipping Box117x120x110 mm (4.61x4.72x4.33 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.