Features
- 220 W continuous program power capacity
- 1.4" horn throat diameter
- 300 - 6000 Hz response
- 113.7 dB sensitivity
- Neodymium magnet assembly
Specifications1
- Throat Diameter36 mm (1.4 in)
- Nominal Impedance16 Ω
- Minimum Impedance9.0 Ω
- Nominal Power Handling2110 W
- Continuous power handling3220 W
- Sensitivity (1W/1m)4113.7 dB
- Frequency Range0.3 - 6.0 kHz
- Recommended Crossover50.3 kHz
- Voice Coil Diameter100 mm (4.0 in)
- Winding MaterialAluminium
- Inductance0.28 mH
- Diaphragm MaterialHT Polymer
- Flux Density1.9 T
- Magnet MaterialNeodymium Ring
Mounting and Shipping Info
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter152 mm (6.0 in)
- Depth62 mm (2.44 in)
- Net Weight2.3 kg (5.07 lb)
- Shipping Units1
- Shipping Weight2.5 kg (5.51 lb)
- Shipping Box170x170x140 mm (6.69x6.69x5.51 in)
- Other Details4x M6 Mounting Studs with bolts and washers included
- Driver mounted on B&C LAB exponential horn.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS voltage is set to 4 V for 16 ohms Nominal Impedance.
- 12 dB/oct. or higher slope high-pass filter.